Miliboo MTT605A Aluminum Video Tripod Kit and MYT802 Fluid Head with Ground Spreader
Key Features
- 75mm Bowl Tripod with Single Flip Locks
- 20 to 67" 2-Stage Height Adjustment
- Flat Base Fluid Head, 17.6 lb Payload
- Removable Ground Spreader
- 1/4"-20 and 3/8"-16 Screws, Locating Pin
- Dual Rosette Mounts, Pan Bar Included
- Bubble Level
The MTT605A Aluminum Video Tripod Kit from miliboo features an aluminum tripod, MYT802 compact fluid head, and ground spreader, and it includes a carry case to pack all these into, providing a complete solution for up to 17.6 lb loads, which is the payload of the fluid head. The tripod has a 75mm bowl base, and the fluid head has a flat base and comes with a 75mm half ball adapter that lets you attach it to the tripod.
The flat base of the fluid head has a 3/8″-16 mounting thread on the bottom. A benefit of the flat base is that it allows you to attach the head directly to sliders and other camera supports that have a 3/8″-16 mounting screw or a 3/8″-16 adapter. With this capability, you can easily move the head along with your camera between the tripod and these various other supports. A quick release plate included with the head offers both 1/4″-20 and 3/8″-16 camera mounting screws along with a locating pin. The head also comes with a pan bar and has an integrated bubble level for checking balance.
The included ground spreader, which allows for increased stability, is removable from the tripod. When it’s removed, the tripod’s spiked feet can be used on soft ground. A key feature of the tripod is a simple single-flip leg locking system on each of the legs, allowing you to efficiently adjust the height of each leg. The tripod is height-adjustable from approximately 20 to 67″ in two stages/three sections. The head adds several more inches on top of this, allowing you to shoot from high angles.
Key Features
- Aluminum 75mm bowl base tripod with single-flip leg locking system; approximately 20 to 67″ height adjustment in two stages
- Compact fluid head with a 3/8″-16 flat base and 75mm half ball adapter; 17.6 lb payload
- Quick release plate with 1/4″-20 and 3/8″-16 screws and locating pin
- Removable ground spreader
- Carry case
- Rosette-mount pan bar included; two rosette mounts provided
- Bubble level
Items Included
- miliboo MTT605A Aluminum Video Tripod Kit with Ground Spreader
- miliboo MYT802 Fluid Head with Flat Head and 75mm Half Ball Adapter
- Carry Case
- Limited 3-Year Manufacturer Warranty
Key Specs
| Camera Mounting | 1/4″-20 & 3/8″-16 Screws with Locating Pin (Sideload Quick Release w/ Sliding Balance Plate) |
| Head Type | Fluid Head |
| Drag Control | No |
| Primary Material | Aluminum |
| Load Capacity | 17.6 lb / 8 kg |
| Maximum Working Height | 66.9″ / 170 cm |
| Minimum Working Height | 19.7″ / 50 cm |
| Closed Length | 31.7″ / 80.5 cm |
| Weight | 11.2 lb / 5.1 kg |
Head
| Camera Mounting | 1/4″-20 & 3/8″-16 Screws with Locating Pin (Sideload Quick Release w/ Sliding Balance Plate) |
| Head Type | Fluid Head |
| Base Mount | Flat Base with 3/8″-16 Female (75 mm Half Ball via Included Adapter) |
| Dimensions | Camera Plate: 5.7 x 2″ / 14.5 x 5.1 cm |
Pan & Tilt
| Drag Control | No |
| Independent Pan Lock | Yes |
| Independent Tilt Lock | Yes |
| Vertical Tilt | +90° to -70° |
| Lateral Tilt | No |
Legs
| Primary Material | Aluminum |
| Leg Lock | Flip Lock |
| Leg Sections | 3 |
| Foot Features | Spiked |
General
| Load Capacity | 17.6 lb / 8 kg |
| Maximum Working Height | 66.9″ / 170 cm |
| Minimum Working Height | 19.7″ / 50 cm |
| Closed Length | 31.7″ / 80.5 cm |
| Accessory Mounting | 2x Pan Handle Fitting |
| Spreader Support | Ground (Included) |
| Weight | 11.2 lb / 5.1 kg |
Packaging Info
| Package Weight | 14.45 lb |
| Box Dimensions (LxWxH) | 37.5 x 7.5 x 7.5″ |